ePMP 6 GHz Force 4600C Connectorized Subscriber Module

Service providers face ever-increasing demand for capacity in a limited amount of spectrum. The Force 4600 series of 6 GHz subscriber modules (SM) meets this demand offering high performance and low latency across both PMP and PTP deployments. The Force 4600 Series of SM’s is available in two form factors: the Force 4600C connectorized with 2 x RP-SMA connectors and the Force 4625 integrated with a 25 dBi dish antenna.

The Force 4600C offers higher capacity and higher modulation. An optional range extender is ordered separately and can be assembled and attached in the field increasing gain to 28 dBi. This extender adds additional link budget and fade margin for challenging links or to move to higher capacity where needed and higher modulations can be achieved..

Both models include the following:

  • High capacity and latencies less than 5 ms when using ePTP technology.
    Proven air interface on top of 802.11ax technology
  • Interoperability with the ePMP 4600 Series AP which uses MU-MIMO to achieve more than 4 Gbps per sector by transmitting to two ePMP 4600 Series SM’s simultaneously.
  • Security features meeting the requirements of enterprise, industrial, government and service provider users.
    Management by Cambium Networks cnMaestro™ management system for easy provisioning, monitoring and upgrades.
  • Network planning with LINKPlanner and cnHeat.
  • 3-year hardware warranty and support from Cambium Networks.
  • Each SM comes with a Power over Ethernet injector and pole mount hardware included.


Quick Look:

  • Broad selection of high-performance subscriber modules (SM) for point-to-point (PTP) and point-to-multipoint (PMP) fixed wireless broadband applications
  • Gbps capacity leveraging 160 MHz channels and 802.11ax technology
  • SM in PMP applications interoperates with ePMP 4600 Access Points
  • Dish reflector is sold separately
  • 3-year hardware warranty

Video: ePMP 4600 6 GHz Fixed Wireless Access Point

6 GHz fixed wireless & Wi-Fi 6E access blanket an outdoor area in São Paulo
“São Paulo is always at the forefront of technology. We embarked on this project to bring consumers this innovative experience in connectivity,” says Manuel Coelho, president of Associação Campo Belo Gastronomia.
Read the Press Release

Gigabit 6 GHz Fixed Wireless is a Reality
“We are on a mission to provide high-quality internet access everywhere we serve. This gives us another tool in the toolkit to do just that,” said Bill Baker, Founder and CEO of Nextlink Internet.
Read the Press Release

Watch the 6 GHz ePMP Solutions webinar replay

Service providers discuss 6 GHz deployment plans and opportunities for Gbps services

What's in the Box and How to Install

ePMP 6 GHz Force 4600C Connectorized Fixed Wireless Subscriber Module

Specifications

SPECTRUM

Channel Width MHz
20 | 40 | 80 | 160
Proprietary Physical Layer
ePMP air interface with 2x2 MIMO/OFDMA based on 802.11ax underlying technology
Channel Spacing
Configurable in 5 MHz increments
Frequency Range
Wide Band Operation 5925–7125 MHz (Note: Allowable frequencies and bands are dictated by individual country regulations.) Operation under AFC (Automatic frequency coordination) control in FCC jurisdictions.

PERFORMANCE

ARQ
Yes
Maximum Capacity
1 Gbps
Latency
< 5 ms
Transmit Power Range
+3 to +30 dBm (combined, to regional EIRP limit) (1 dB interval)

PHYSICAL

Ethernet Interface
100/1000 BaseT, rate auto negotiated, 802.3at compliant; 4600C has SFP+ port
Surge Supression*
1 Joule Integrated
Environmental
IP67
Power Consumption
28 W

ePMP 6 GHz Force 4600C Connectorized Fixed Wireless Subscriber Module

Documentation

Contact